Here we will guide on how to install a stock ROM flash file on Realme X2 (Model No: RMX1992). The guide is simple and easy to follow. You can watch our complete video guide.

These days there is a great number of smartphone enthusiasts interested in learning the technical aspects of smartphones. So, they keep tweaking the phone in terms of hardware and software. However, sometimes, unfortunately, they end up bricking their device. Now, as we know in a bricking scenario, the phone won’t start and becomes a paperweight. This can happen with any smartphone. Some of our readers had this issue on their Realme X2 (RMX1992). So, in this post, we will guide you to flash the Stock ROM file on your Realme X2. We have put up the download link for the corresponding ROM along with the installation guide. So, check it out.

Realme X2 Specifications: Overview

The dual Nano-SIM supported Realme X2 comes with a 6.4-inches Full-HD+ Super AMOLED display with a 19.5:9 aspect ratio, 1080×2340 pixels resolution, and 91.9 percent screen-to-body ratio. It has a waterdrop-style notch with a slight chin at the bottom. It includes an in-display fingerprint sensor along with Corning Gorilla Glass 5 protection. The device is powered by Snapdragon 730G SoC, paired with 6GB/8GB of LPDDR4X RAM and 64GB/128GB of UFS 2.1 storage options. While the storage is expandable via a MicroSD card.

The handset sports a quad rear camera setup which includes a 64MP primary Samsung GW1 sensor with an f/1.8 aperture lens. While the setup includes an 8MP secondary wide-angle sensor (f/2.25), a 2MP depth sensor, and a 2MP sensor for 4cm macro shots. It has a 32MP selfie sensor at the front side with AI modes.

In terms of the connectivity options, it includes 4G LTE, Wi-Fi 802.11ac, Bluetooth 5.0, GPS, A-GPS, NFC, USB Type-C port, and a 3.5mm audio jack. While the device features an accelerometer, ambient light, gyroscope, magnetometer, and a proximity sensor. It sports a 4,000 mAh battery with 30W Oppo VOOC 4.0 Flash Charge technology. It measures 158.7×75.2×8.6mm and weighs around 182 grams.

Importance of Stock Firmware

Stock ROM is always an important part of smartphones. When you move to stock ROM, you can fix up a lot of problems. We have listed the sam below.

  • With the help of stock ROM, You can unbrick your Realme X2.
  • Solve the boot loop issue on Realme X2 (RMX1992).
  • You can bypass system Lock and Screen Lock
  • Removes any possible case of spyware or Adware in your devices.
  • To fix any bugs on your Realme X2.

Firmware Details:

  • Device Supported: Realme X2 (RMX1992)
  • Tool Supported: QFIL Flash tool or Use QCom Download Tool | 2nd Method: MSMDownload Tool or Miracle Box
  • Processor: Qualcomm Snapdragon 855+ SoC
  • Android OS: 9.0 Pie
  • File: Software Update

How to Install Stock ROM on Realme X2 (RMX1992)

Before doing anything, we need to have the ROM file for the designated device ie Realme X2. Here is the download link for the same.

Installation Guide

Before beginning with the installation remember a few pointers we have mentioned below.

Download Stock ROM File

  • RMX1992AEX_11.F.26: Download
  • RMX1992AEX_11_F.25: Download
  • RMX1992_11_F.25: Download
  • RMX1992AEX_11_F.23: Download
  • RMX1992EX_11.C.18: Download
  • RMX1992AEX_11.C.18: Download
  • RMX1992EX_11.C.17: Download
  • RMX1992EX_11.C.12: Download
  • RMX1992EX_11.C.09: Download
  • RMX1992EX_11.C.05: Download
  • RMX1992EX_11.A.19: Download
  • RMX1992EX_11.A.18: Download
  • RMX1992EX_11.A.17: Download

Pre-Requisites

  • This ROM is exclusively for the Realme X2 (RMX1992). Don’t use it on other devices.
  • Charge your phone completely before installing the ROM.
  • A Windows PC/Laptop
  • Download and install Realme USB drivers on your Windows PC.
  • Download QFil Tool or QPST Flash tool and install on your PC.
  • It is always recommended to take a backup of your Android Device.
  • Backup Android Phone Without Root on any device
  • If you have TWRP Recovery, Create and Restore Nandroid Backup using TWRP Recovery

Method 1: Instructions to Install via QFIL Tool:

Download Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the firmware using QFIL tool

  • Backup Android Phone Without Root on any device
  • If you have TWRP Recovery, Create and Restore Nandroid Backup using TWRP Recovery

Method 2: Instructions to Install via MSM Download tool:

  • Download the MSM Download tool, firmware, and drivers on your PC.
  • Now install the USB drivers
  • Place the MSM download tool and firmware in the same folder
  • Open the MSM download tool and connect your device to PC/Laptop
  • Once you connect, it will automatically load the firmware, if not select it manually.
  • Click on start button and wait patiently to complete the installation process.
  • Once it is done! remove your device from PC. That’s it!

Method 3: Instructions to Install via QPST Tool:

Here are the instructions you need to follow in order to install Stock ROM on the Realme X2 :

  • First of all, do all the PREREQUISITE STEPS and Now Open the Extracted QPST Folder
  • You will find two files with the name: Qualcomm_USB_Drivers_For_Windows.rar and QPST.WIN.2.7 Installer-00429.zip
  • Open the QPST Win folder and Install the QPST.exe file on your PC/Laptop
  • After Installation, Go to the Installed Location in the C Drive
  • Open the QPST Configuration
  • Now in the QPST Configuration, Click on Add new port -> Select the com port of your device -> and close it
  • Now Open the EMMC Software Downloader in the same folder located all the QPST Files
  • In EMMC Software Downloader, Check program boot loaders -> Browse for the device com port
  • Now Click Load XML Def and browse for rawprogram0.xml in folder ROM in EMMC Software Downloader (If you didn’t extract please extract the ROM and then browse the file rawprogram0.xml)
  • Now tap on Load Patch def and browse for patch0.xml in folder ROM
  • Check the search path 2 and browse for the folder ROM
  • Now click download, wait for the download to finish (it never finish but it also detects for a new driver, and that’s important) and it will search for the new hardware found, install the driver
  • That’s it! Once your installation is done! Reboot the phone! Congrats, you successfully installed Stock ROM on Realme X2.

So, that’s it, guys. Now you know how to install stock ROM on Realme X2 (RMX1992). We hope this tutorial was helpful to you. In case you have any queries do let us know in the comments.