On this page, we will guide you on how to download and install the official firmware file on Realme Pad RMP2103. This tutorial is easy to follow. Realme Pad is powered by a Mediatek MT6769V processor powered by Android 11.0 under Realme UI 2.0.

If you are someone who is facing software issues such as WiFi or Bluetooth issues, lag, boot loop, or hard brick, you can fix the device by following this tutorial. By using the firmware file, you can bypass FRP lock, pattern lock, downgrade, or upgrade, and you can fix most of the software glitches by flashing the stock firmware.

Advantages of Installing Stock ROM

Here are some of the advantages of installing firmware files on your Realme Pad RMP2103:

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adwares from Realme Pad
  • You can fix the boot loop issue on Realme Pad
  • Fix Unfortunately, the app has stopped errors on Realme Pad
  • Fix Network related issue
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • You can unroot Realme Pad
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
  • Restore Realme Pad back to Factory State

Firmware Details

  • Device Name: Realme Pad RMP2103
  • Gapps File: Included
  • Tool Supported: SP Flash Tool
  • Processor: Mediatek MT6769V/CU Helio G80
  • Android OS: 11.0

Steps to Install Stock Firmware on Realme Pad RMP2103

Now, before we get straight to the Steps to Install Stock Firmware on Realme Pad RMP2103, let us take a look at some of the prerequisites.

Pre-Requirements:

  • Supported device: Realme Pad RMP2103
  • Make sure to charge your device more than 50%
  • You need a PC or Laptop with a USB cable.
  • Take a complete backup using any method given below
  • Full Data Backup without Root
  • Nandroid Backup via TWRP
  • Download Drivers and Tools: VCOM drivers, SP Flash Tool, and Realme USB Drivers

Download Flash Files

Method 1: Instructions to Install via Recovery:

  • Full Data Backup without Root
  • Nandroid Backup via TWRP

First, you can try the official method to install the OTA stock ROM update via Realme device recovery.

Method 2: Instructions to Install via SP Flash Tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

  • Make sure you follow and download all the required files and flash tools on your PC.
  • Open the flash tool exe file to open the SP Flash Tool User Interface
  • Once your load the SP Flash tool UI, Tap on the Download option
  • In the download tab, you have to load both the download agent and the scatter text file in the scatter-loading section.
  • You will find the scatter text file inside the ROM package for most cases, if not, you can create a scatter text file on your own.
  • Once you load the file, click the Download button
  • To start the upgrade process of stock ROM on your Realme Pad, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  • When the phone connects, your device will start upgrading the stock firmware
  • You need to wait for a few minutes to complete the upgrade process.
  • Once the flashing process completes, you will find a green button which means a successful upgrade.
  • That’s it! You can reboot your Realme Pad

Follow our full-depth video guide below

So that’s it guys, this was our take on How to flash the firmware file on Realme Pad [Firmware Flash File]. We hope that you found this post useful. Let us know what do you guys think about it in the comments section down below.