On this page, we will guide you on how to download and install the official firmware file on Realme Narzo 30 Pro 5G RMX2117. This tutorial is easy to follow. Realme Narzo 30 Pro 5G is powered by a MediaTek MT6853 Dimensity 800U 5G processor powered by Android 10 under Realme UI 1.0.

If you are someone who is facing software issues such as WiFi or Bluetooth issues, lag, boot loop, or hard brick, you can fix the device by following this tutorial. By using the firmware file, you can bypass FRP lock, pattern lock, downgrade, or upgrade, and you can fix most of the software glitches by flashing the stock firmware.

Also Read

Fix: Realme Narzo 30, 30 Pro, and 30A Not Fast Charging

Advantages of Installing Stock ROM

Here are some of the advantages of installing firmware file on your Realme Narzo 30 Pro 5G RMX2117:

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adwares from Realme Narzo 30 Pro 5G
  • You can fix the boot loop issue on Realme Narzo 30 Pro 5G
  • Fix Unfortunately, the app has stopped error on Realme Narzo 30 Pro 5G
  • Fix Network related issue
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • You can unroot Realme Narzo 30 Pro 5G
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
  • Restore Realme Narzo 30 Pro 5G back to Factory State

Firmware Details

  • Device Name: Realme Narzo 30 Pro 5G RMX2117
  • Gapps File: Included
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6853 Dimensity 800U 5G
  • Android OS: 10.0

Steps to Install Stock Firmware on Realme Narzo 30 Pro 5G RMX2117

Now, before we get straight to the Steps to Install Stock Firmware on Realme Narzo 30 Pro 5G RMX2117, let us take a look at some of the prerequisites.

Pre-Requirements:

  • Supported device: Realme Narzo 30 Pro 5G RMX2117
  • Make sure to charge your device more than 50%
  • You need a PC or Laptop with a USB cable.
  • Take a complete backup using any method given below
  • Full Data Backup without Root
  • Nandroid Backup via TWRP
  • Download Drivers and Tools: VCOM drivers, SP Flash Tool, and Realme USB Drivers

Download Flash Files

Method 1: Instructions to Install via Recovery:

  • Full Data Backup without Root
  • Nandroid Backup via TWRP

First, you can try the official method to install the OTA stock ROM update via Realme device recovery.

Method 2: Instructions to Install via SP Flash Tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

  • Make sure you follow and download all the required files and flash tools on your PC.
  • Open the flash tool exe file to open the SP Flash Tool User Interface
  • Once your load the SP Flash tool UI, Tap on Download option
  • In the download tab, you have to load both the download agent and the scatter text file in the scatter-loading section.
  • You will find the scatter text file inside the ROM package for most cases, if not, you can create a scatter text file on your own.
  • Once you load the file, click the Download button
  • To start the upgrade process of stock ROM on your Realme Narzo 30 Pro 5G, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  • When the phone connects, your device will start upgrading the stock firmware
  • You need to wait for a few minutes to complete the upgrade process.
  • Once the flashing process completes, you will find a green button which means a successful upgrade.
  • That’s it! You can reboot your Realme Narzo 30 Pro 5G

Follow our full-depth video guide below:

So that’s it guys, this was our take on How to flash the firmware file on Realme Narzo 30 Pro 5G [Firmware Flash File]. We hope that you found this post useful. Let us know what do you guys think about it in the comments section down below.