On this page, we will share all the latest Realme Narzo 20 Pro (codenamed RMX2161) firmware flash files. To flash the firmware file, you need SP Flash Tool which works on both Windows, Mac, and Linux. You can follow this guide to flash the firmware stock ROM file on Realme Narzo 20 Pro.

Realme introduced the Narzo series with the budget segment in mind. And after the success of the Naro 10 series, now we have the Narzo 20 series explicitly targeting an audience who needs high performance on a budget. We have three new models: the Narzo 20A, the Narzo 20, and the Narzo 20 Pro. The Pro edition is the more expensive of the lot and comes with a few extras for the price.

Also Read

How to Install Custom ROM on Realme Narzo 20 and 20 Pro [GSI build]

Realme Narzo 20 Pro Device Overview:

The Narzo 20 Pro sports a 6.50-inch FHD+ 90Hz display with an aspect ratio of 20:9. Much priority is given to the performance, so we see the MediaTek Helio G95 inside it, which is more than just a capable processor from MediaTek. It comes with two RAM variants, one with 6GB of RAM and 64GB of internal storage and 8GB of RAM and 128GB of internal storage. We also get a big 4,500 mAh battery inside it with a 65W Superdart charging support out of the box.

In terms of optics, we get a quad-camera setup at the back with a 48 MP primary camera with an aperture of f/1.8, an 8 MP ultra-wide-angle camera with an aperture of f/2.3, a 2 MP monochrome portrait camera with an aperture of f/2.4, and a 2 MP macro camera with an aperture of f/2.4. At the front, we get a 16 MP camera in a hole punch design with an aperture of f/2.1. The rear camera supports 4K video recording while the front camera is only limited to 1080p videos.

The fingerprint sensor is located in the power button of the device, making the unlocking process natural. We also get Android 10 out of the box with Realme’s custom UI running on top. It is launched in two different color variants, namely, Black Ninja and White Knight. And the price of the device is set just under the 15K mark at 14,999 INR.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Realme Narzo 20 Pro Stock ROM flash file on your computer.

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adwares from Realme Narzo 20 Pro
  • You can fix the boot loop issue on Realme Narzo 20 Pro
  • Fix Unfortunately, the app has stopped errors on Realme Narzo 20 Pro
  • Fix Network related issue
  • Patch Boot image to Root using Magisk
  • You can unroot Realme Narzo 20 Pro
  • To Reset or Remove FRP on your device:
  • Restore Realme Narzo 20 Pro back to Factory State

Steps to Install Realme Narzo 20 Pro Flash Files (Firmware)

Now, before we get straight to the Steps to Install Stock Firmware on Realme Narzo 20 Pro, let us take a look at some of the prerequisites.

Prerequisites

  • Please note that this guide will work only with the Realme Narzo 20 Pro.
  • You should have a Windows Laptop or PC for this guide.
  • Make sure that your Realme Narzo 20 Pro has at least a 60% charge left.
  • It is always recommended to take a backup of your Android Device.
  • Download the SP Flash tool and install it on your PC.
  • Download and Install the VCOM Driver on your Windows PC.
  • Install Latest Driver: Install the Latest Realme USB Drivers. [For All Android USB Drivers]

Once you have the above prerequisites, you can proceed to Instructions to Install Stock ROM on Realme Narzo 20 Pro.

Download Flash Files:

Method 1: Instructions to Install via Recovery:

Disclaimer

GetDroidTips will not be responsible for bricking, hardware, or any kind of software problems arising on your while you follow this guide to install stock ROM on your phone. First, understand the tutorial and then follow it at your own risk.

First, you can try the official method to install the OTA stock ROM update via Realme device recovery.

Method 2: Instructions to Install via SP Flash Tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

Advertisement

  • Make sure you follow and download all the required files and flash tools on your PC.
  • Open the flash tool exe file to open the SP Flash Tool User Interface
  • Once your load the SP Flash tool UI, Tap on the Download option
  • In the download tab, you have to load both the download agent and the scatter text file in the scatter-loading section.
  • You will find the scatter text file inside the ROM package for most cases, if not, you can create a scatter text file on your own.
  • Once you load the file, click the Download button
  • To start the upgrade process of stock ROM on your Realme Narzo 20 Pro, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using a USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  • When the phone connects, your device will start upgrading the stock firmware
  • You need to wait for a few minutes to complete the upgrade process.
  • Once the flashing process completes, you will find a green button which means a successful upgrade.
  • That’s it! You can reboot your Realme Narzo 20 Pro

So that’s it guys, this was our take on How to Install Stock ROM on Realme Narzo 20 Pro. We hope that you found this post useful. Let us know what do you guys think about it in the comments section down below.