On this page, we will guide you on how to install the official stock Firmware flash file on your Realme C35 RMX3511. Well, the device is based on Android 11 which is powered by the Spreadtrum Unisoc Tiger T616 processor. This guide will be helpful to unbrick or fix any software issues on your device.
Realme C35 was launched in India as the company’s latest budget which features a triple rear camera that includes a flagship-grade 50-megapixel primary sensor, a Full-HD+ display, and a Unisoc Tiger T616 SoC.
To install the firmware flash file on Realme C35 RMX3511, you need to download the software called SPD Flash tool (also known as Spreadtrum flash tool). This method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the firmware file.
Realme C35 Device Overview:
The Realme C35 features a 6.6-inch IPS LCD panel with a 60Hz refresh rate. It is an FHD+ panel with a resolution of 1080 x 2408 pixels and an aspect ratio of 20:9 ratio. The screen has a peak brightness of 600 nits. Under the hood, we have the Unisoc Tiger T616 chip built on a 12 nm manufacturing process. It is an octa-core processor with two Cortex-A75 cores clocked at 2.0 GHz and six Cortex-A55 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Mali-G57 MP1.
We get a triple camera setup at the rear and a single camera at the front in terms of optics. The triple camera setup at the rear features a 50 MP primary sensor paired with an f/1.8 lens, a 2 MP macro sensor paired with an f/2.4 lens, and a 0.3 MP depth sensor paired with an f/2.8 lens. For selfies, we get an 8 MP sensor paired with an f/2.0. The rear setup can capture 1080p videos, while the front camera is limited to 720p video recording.
There are three storage options of this smartphone: 64GB + 4GB RAM, 64GB + 6GB RAM, and 128GB + 4GB RAM. There is also a dedicated MicroSD slot for storage expansion. It comes with Android 11 out of the box with Realme UI 2.0 skin running on top. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, FM radio, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, gyro, proximity, and compass. Powering it all is a 5,000 mAh battery that supports 18W fast charging. The smartphone is available in two color options: Glowing Black and Glowing Green.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Realme C35 Stock ROM flash file on your computer.
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adwares from Realme C35
- You can fix the boot loop issue on Realme C35
- Fix Unfortunately, the app has stopped errors on Realme C35
- Fix Network related issue
- Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
- You can unroot Realme C35
- To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
- Restore Realme C35 back to Factory State
How to Flash Realme C35 RMX3511 Firmware File
Before installing the Stock ROM on your Realme C35, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Pre-Requirements:
- Supported device: Realme C35
- Make sure to charge your device more than 50%
- You need a PC or Laptop with a USB cable.
- Take a complete backup of your android phone
- Download Drivers and Tools: Spreadtrum drivers, SPD Flash Tool, and Realme USB Drivers
Realme C35 RMX3511 Flash Files
Instructions to Install: via SPD Flash tool
Now, without wasting any more time, let’s jump into the firmware installation steps below:
That’s it, guys. We hope that you’ve installed the Stock Firmware on your Realme C35 RMX3511 device successfully. Feel free to ask in the comments below for any queries.
