Good news for all the Realme 3 unit users as the Realme 3 ISP PinOUT to Hard Reset / FRP Bypass is now available. You can easily get the ISP PinOUT connection of the Realme 3 (RMX1821, RMX1825) by following the full guide below along with images. By using the ISP PinOUT, you can easily bypass FRP lock or reset user data on your device via UFi Box. Check out the guide below.

What is ISP PinOUT?

ISP or In-system programming also known as in-circuit serial programming (ICSP) for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile, computer. You will find the IS Pinout connection on the logic board of your device. Therefore, you will need to remove the back panel of the handset and follow the below image to locate the pinout.

Also Read

Realme 3 ISP Pinout Image:

Required Downloads

  • Download UFi Box eMMC Service Tool
  • Install Realme USB Drivers on your PC

Pre-Requirements:

  • This guide is for Realme 3 (RMX1821, RMX1825) variant only.
  • You will need a Windows PC/Laptop and a USB cable.

Steps to Bypass FRP Lock on Realme 3

  • Open the back panel of the device at first.

  • Connect the wire with the correct ISP Pinout.

  • Then connect the ISP Pinout to the UFi Box and connect your device via USB cable to the PC.

  • Go to the Device Manager on your PC.

  • You will see your device in the list > run the UFi Box and locate the scatter file.

  • Go to the user Partition / Special Task and click on Reset FRP on the UFI Box.

  • You’re done.

Steps to Hard Reset Realme 3 (Bypass Pattern Lock)

  • Remove the back panel of the device and connect the wire to the ISP Pinout.

  • Next, connect the correct ISP Pinout to the UFi Box.

  • Connect your Realme 3 to the PC via a USB cable.

  • Head over to the PC and open Device Manager.

  • If your device is located there, run the UFi Box.

  • Locate the scatter file > go to the Partition / Special Task on the UFI Box.

  • Click on Factory Reset.

  • Enjoy!

Realme 3: Overview

Realme 3 was announced in March 2019 which sports a 6.22-inch IPS LCD display with a screen resolution of 1520 x 720 pixels with 270 PPI pixel density. The device is protected by Corning Gorilla Glass 3.

Realme 3 is powered by a Mediatek MT6771 Helio P60 (12 nm) or Mediatek Helio P70 (12nm) chipset coupled with 3/4GB of RAM and 32/64GB of internal storage. It also supports a 256GB external memory card. The device came out of the box with Android 9.0 Pie under ColorOS 6 and was backed by a 4230 mAh battery (Non-removable).

As far as the camera is concerned, the device has a Dual-camera setup with 13MP + 2MP primary sensors and a selfie camera with a 13MP lens. Other connectivity option includes 4G-VoLTE, GPS, Glonass, Bluetooth, Mobile Hotspot, accelerometer, ambient light sensor, gyroscope, proximity sensor, and compass/ magnetometer. etc. The Realme 3 comes with a rear fingerprint sensor feature.

That’s it, guys. We hope this guide was helpful to you in order to bypass the FRP Lock or perform a factory reset on your Realme 3 handset. If you’ve any queries, let us know in the comments below.